Notification No. 57/2017, Dated 30th June 2017

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDINARY, PART II, SECTION 3, SUB-SECTION (i)]

GOVERNMENT OF INDIA
MINISTRY OF FINANCE
(DEPARTMENT OF REVENUE)

Notification No. 57/2017 – Customs

New Delhi, the 30th June, 2017

G.S.R. (E). – In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, on being satisfied that it is necessary in the public interest so to do, hereby exempts the goods of the description as specified in column (3) of the Table below, as the case may be, and falling within the Chapter, heading, sub-heading or tariff item of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) as are specified in the corresponding entry in column (2) of the said Table, when imported into India, from so much of the duty of customs leviable thereon under the said First Schedule as is in excess of the amount calculated at the standard rate as specified in the corresponding entry in column (4) of the said Table subject to any of the conditions, as specified in the Annexure to this notification, the condition number of which is mentioned in the corresponding entry in column (5) of the said Table.

TABLE

S.No.

Chapter or Heading or Sub-heading or tariff item

Description of goods

Standard rate

Condition No.

(1)

(2)

(3)

(4)

(5)

1.

64016 99 90

The following goods for use in manufacture of cellular mobile phones, namely :-

(i)                Microphone Rubber Case

(ii)             Sensor Rubber Case / Sealing Gasket including sealing gaskets / cases from Rubbers like SBR, EPDM, CR, CS, Silicone and all other individual rubbers or combination / combination of rubbers

 

 

2.

57318 15 00

Screw for use in manufacture of cellular mobile phone

 

 

3.

77326 90 99

SIM socket / Other Mechanical items (Metal) for use in manufacture of cellular mobile phones

 

 

4.

18517 12

Telephones for other wireless networks, other than cellular networks

 

 

5.

48517 70 90

(a)  All goods other than the parts of cellular mobile phones

(b)  Inputs or sub-parts for use in manufacture of parts mentioned at (a) above

 

 

6.

2Any Chapter

r (a) The following goods for use in manufacture of cellular mobile phones, namely :-

(i)                Printed Circuit Board Assembly (PCBA)

(ii)             Camera Module

(iii)           Connectors

(iv)           Display Assembly

(v)              Touch Panel / Cover Glass Assembly

(vi)           Vibrator Motor / Ringer

(c)  Inputs or parts for use in manufacture of items mentioned at (a) above

(d)  Inputs or sub-parts for use in manufacture of parts mentioned at (b) above

 

 

7.

3Any Chapter

Inputs or raw material for use in manufacture of following parts of Cellular mobile phones;

(i)                Charger or adapter

(ii)             Battery pack

(iii)           Wired Headset

(iv)           Battery cover

(v)              Front cover

(vi)           ront cover (with Zinc Casting)

(vii)         Middle cover

(viii)      GSM Antenna / Antenna of any technology

(ix)           Side Key

(x)              Main Lens

(xi)           Camera Lens

(xii)         Screw

(xiii)      Microphone Rubber Case

(xiv)       Sensor Rubber Case / Sealing Gasket including sealing gaskets / cases from Rubbers like SBR, EPDM, CR, CS, Silicone and all other individual rubbers or combination / combination of rubbers

(xv)         PU case / Sealing Gasket – Other articles of Polyurethane foam like sealing gaskets / case

(xvi)       Sealing Gaskets / Cases from PE, PP, EPS, PC and all other individual polymers or combination / combination of polymers

(xvii)    SIM socket / Other Mechanical items (Metal)

(xviii)  SIM Socket / Other Mechanical items (Plastic)

(xix)       Back Cover

(xx)         Conductive Cloth

(xxi)       Heat Dissipation Sticker Battery Cover

(xxii)    Sticker-Battery Slot

(xxiii)  Protective Film for main Lens

(xxiv)  Mylar for LCD FPC

(xxv)     LCD Conductive Foam

(xxvi)  Film-Front Flash

(xxvii)            LCD Foam

(xxviii)         BT Foam

(xxix)  Microphone and Receiver

(xxx)     Key Pad

(xxxi)  USB Cable

 

 

8.

8Any Chapter

r Inputs or raw material for use in manufacture of following goods namely :-

(i)                Other machines capable of connecting to an automatic data processing machine or to a network (8443 32 90)

(ii)             Ink cartridges, with print head assembly (8443 99 51)

(iii)           Ink cartridges, without print head assembly (8443 99 52)

(iv)           Ink spray nozzle (8443 99 53)

(v)              Base stations (8517 61 00)

(vi)           All goods falling under tariff item 8517 62 90

(vii)         All goods falling under tariff item 8517 69 90

 

 

 

ANNEXURE

Condition No.

Conditions

1.

If the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty) Rules, 2017.

 

This notification shall come into force with effect from the 1 st day of July, 2017.

[F.No.354/20/2017-TRU]

(Mohit Tewari)
Under Secretary to the Government of India

Seair is proud to have a loyal customer base from big brands.

We have successfully served many reputable clients for Import-Export Data Information Services. Here are some of our clients:

Get a free Import-Export data demonstrative report on desired products.

We don’t offer any assistance over buying or selling any products.

Thank You

Big thanks to showing your interest in SEAIR Exim Solutions. We’ve currently received your request for data information. We will return on the same query in a short span of time.

Copyright © 2009 - 2024 www.seair.co.in. All Rights Reserved.