Notification No. 10/2015, Dated 1st March 2015

[TO BE PUBLISHED IN THE GAZETTE OF INDIA, EXTRAORDI NARY, PART II, SECTION 3, SUB-SECTION (i)]

GOVERNMENT OF INDIA MINISTRY OF FINANCE (DEPARTMENT OF REVENUE)

NOTIFICATION No. 10/2015-Customs

New Delhi, the 1st March, 2015

G.S. R. (E).—In exercise of the powers conferre d by sub-section (1) of section 25 of the Customs Act,1962 (52 of 1962), the Central G overnment being satisfied that it is necessary in the public interest so to do, hereby m akes the following further amendments in the notification of the Government of India in the Ministry of Finance (Department of Revenue) No. 12/2012-Customs, dated the 17 th March,2012, published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-secti on (i), vide G.S.R.185(E), dated the 17 th March,2012, namely:- In the said notification,- (A) in the Table,- (i) after S.No. 113 and the entries relating theret o, the following S.No. and entries shall be inserted, namely :-

“113A 2528 Ulexite Ore Nil - -”;

(ii) against S.No. 125, for the entry in column (4) , the entry “ 5%” shall be substituted;

(iii) after S.No. 142B and the entries relating the reto, the following S.No. and entries shall be inserted, namely:-

“142C 2711 13 00 Butane 5% - -”;

(iv) after S.No.157and the entries relating there to, the following S.No. and entries shall be inserted, namely :-

“157A. 2807 00 10 Sulphuric acid for the manufacture of fertilizers 2.5% - -”;

(v) against S.No.173D, for the entry in column (3), the entry “All goods” shall be substituted;

(vi) against S.No.175, for the entry in column (4), the entry “2%” shall be substituted;

(vii) against S.No.177, for the entry in column (4) , the entry “2%” shall be substituted;

(viii) against S.No.178, for the entry in column (4 ), the entry “2%” shall be substituted;

(ix) after S.No. 181 and the entries relating there to, the following S.Nos. and entries shall be inserted, namely:-

“181A. 2914 61 00 Anthraquinone 2.5% - -”;
181B. 2916 12 1 Butyl acrylate 5% - -”;

(x) after S. No. 247 and the entries relating there to, the following S.Nos. and entries shall be inserted, namely :-

“247A. 3919 90 90 Water blocking tape for use in the manufacture of insulated wires and cables falling under heading 8544 (except sub-heading 8544 11) 7.5% - 5;
247B. 4002 70 00 Ethylene – propylene – non - conjugated diene rubber (EPDM) for use in the manufacture of insulated wires and cables falling under heading 8544 (except sub-heading 8544 11) 7.5% - 5;
247C 6814 90 90 Mica glass tape for use in the manufacture of insulated wires and cables falling under heading 8544 (except sub-heading 8544 11 7.5% - 5”

(xi) after S.No. 329 and the entries relating there to, the following S.No. and entries shall be inserted, namely:-

“329A 72 All goods
10%
- -”;

(xii) after S.No. 334 and the entries relating ther eto, the following S.Nos. and entries shall be inserted, namely:-

“334A 73 All goods
10%
- -”;
334B. 7325 Metal parts for use in the manufacture o f electrical insulators falling under heading 8546 7.5% - 5”:

(xiii) after S.No. 344and the entries relating t hereto, the following S.No. and entries shall be inserted, namely :

“344A. 8110 10 00, 8110 20 00 All goods 2.5%
- -”;

(xiv) after S.No. 371 and the entries relating thereto, the following S.Nos. and entries shall be inserted, namely:-

“371A. 2825 60 20 Ceria zirconia compounds for use in the manufacture of washcoat for catalytic converters 5%
- 5;
371B 2846 10 90 Cerium compounds for use in the manufacture of washcoat for catalytic converters 5% - 5:
371C 3824 90 90 Zeolite for use in the manufacture of washcoat for catalytic converters 5% - 5":

(xv) against S. No. 394, in column (5) for the entr y “Nil”, the entry “-” shall be substituted;

(xvi) after S.No. 399 and the entries relating ther eto, the following S.Nos. and entries shall be inserted, namely :-

“399A. 8414 90 11 The following goods for use in the manufacture of refrigerator compressor falling under tariff item 8414 30 00, namely:- (i) C-Block compressor; (ii) Crankshafts. 5%
- -
399B. 536 20 90 Over Load Protector (OLP) and positive thermal coefficient for use in the manufacture of refrigerator compressor falling under tariff item 8414 30 00 5% - -
399C 8419 Evacuated tubes with three layers of sol ar selective coating for use in the manufacture of solar water heater and system Nil - 5":

(xvii) after S.No. 406A and the entries relating th ereto, the following S.Nos. and entries shall be inserted, namely:-

“406B. 8483 40 00 all screws for use in the manufacture of CNC Lathes (tariff item 8458 11 00, 8458 91 00) or Machining Centres (tariff item 8457 10 10, 8457 10 20) 2.5%
- 5
406C 8466 93 90 Linear Motion Guides for use in the manufacture of CNC Lathes (tariff item 8458 11 00, 8458 91 00) or Machining Centres (tariff item 8457 10 10, 8457 10 20 2.5% - 5
406D. 8537 10 00 CNC Systems for use in the manufacture of CNC Lathes (tariff item 8458 11 00, 8458 91 00) or Machining Centres (tariff item 8457 10 10, 8457 10 20) 2.5% - 5":

(xviii) after S.No 407 and the entries relating the reto, the following S.No. and entries shall be inserted, namely :-

407A . 84 or any other Chapter (a) Parts, components or accessories for use in the manufacture of tablet computer. Nil Nil 5 (b) Sub - parts for use in the manufacture of items mentioned at (a) above.

Nil

 

 

Nil

Nil

 

 

Nil

 

5

 

 

5

(xix) against S.No. 408, for the entry in column (2 ), the entries “8472 90 or 8473 40” shall be substituted

(xx) after S.No. 424 and the entries relating there to, the following S.No. and entries shall be inserted, namely :-

“424A. 8504 Active Energy Controller (AEC) for use in manufacture of Renewable Power System (RPS) inverters 5%

-l

 

46

(xxi) after S.No. 428 and the entries relating ther eto, the following S.No. and entries shall be inserted, namely :-

 

“428A 525 80 20 Digital Still Image Video Cameras capable of recording video with minimum resolution of 800 x 600 pixels, at minimum 23 frames per second, for at least 30 minutes in a single sequence, using the maximum storage (including the expanded) capacity Nil

-

-:

(xxii) against S.No. 429, for the entry in column ( 4), the entry “Nil” shall be substituted; (xxiii) against S.No. 432, for the entry in column (3), the entry “LCD (Liquid crystal display), LED (Light Emitting Diode) or OLED (Organic LED) TV panels,” shall be substituted;

(xxiv) against S.No. 432B, in column (3), after ite m (xi), item “(xii) Black Light Unit Module” shall be inserted;

(xxv) against S.No. 433, for the entry in column ( 4), the entry “Nil” shall be substituted; (xxvi) after S.No. 436 and the entries relating th ereto, the following S.Nos. and entries shall be inserted, namely:-

(xxvi) after S.No. 436 and the entries relating th ereto, the following S.Nos. and entries shall be inserted, namely:

“436A 8702 or 8704 Motor vehicles: (a) If imported as a Completely Knocked Down (CKD) kit containing all the necessary components, parts or sub- assemblies, for assembling a complete vehicle with engine, gearbox and transmission mechanism not in a pre- assembled condition; (b) in a form other than (a) above

10%

 

20%

-

-:

436B 8702 Electrically operated vehicles whether imported in a Completely Knocked Down (CKD) kit containing all the necessary components, parts or sub- assemblies, for assembling a complete kit with engine, gearbox and transmission mechanism not in a pre- assembled condition or not. 10%    

(xxvii) after S.No. 474 and the entries relating th ereto, the following S.No. and entries shall be inserted, namely :

 

“474A 90 or any other Chapte

The following goods for use in the manufacture of Flexible Medical Video Endoscope (heading 9018), namely:-

(i). CCD/CMOS Camera Sensor;

(ii). Main printed circuit board of CCD/CMOS Camera Sensor;

(iii). Objective Lens for CCD/CMOS Camera Sensor;

(iv). Light Guide/Image Guide optical fiber bundle;

(v). Ultrasound Transducer; (vi). Main printed circuit board of Ultrasound Transducer.

2.5%

 

 

 

 

-

5:

(xxviii) against S.No. 480,- (i). for the entry in column (4), the entry “Nil” shall be substituted; (ii). for the entry in column (5), the entry “Nil” shall be substituted; (xxix) after S.No.. 488 and the entries relating th ereto, the following S.No. and entries shall be inserted, namely :-

 

“488A 90 or any other Chapte

The following goods for use in the manufacture of pacemakers (tariff item 9021 50 00), namely:-

(i). Battery;

(ii). Titanium;

(iii). Palladium wire;

(iv). Eutectic Wire ;

(v). Silicone Resins and Silicone Rubbers;

(vi). Solder Paste;

(vii). Reed Switch;

(viii). Diodes;

(ix). Transistors;

(x). Capacitors;

(xi). Controllers;

(xii). Coils(steel) ;

(xiii). Tubing (silicone)

Nil

 

 

 

-

5":

(B) after the Table, in the proviso,-

(i) in clause (g), for the figures, letters and words “31st day of March, 2015”, the figures, letters and words “1st day of April 2016” shall be substituted;

(ii) in clause (h), for the figures, letters and words “31st day of March, 2015”, the figures, letters and words “1st day of April 2016” shall be substituted

 

C) in the ANNEXURE,-(i) in Condition No. 10, under heading “Conditio ns”, for the “Form”, the following “Form” shall be substituted, namely:-

“Form Certificate No.............. of .............. (year)

Certified that the drug / medicine......................(name ofthe drug / medicine) beingimported by ..................................... is a life saving drug / medicine and exemptionfrom the payment of customs duty is recommended.

This certificate shall be valid for one or more imports within the period of one year fromthe date of its issue.

Signature with date of DirectorGeneral /

Deputy Director General /Assistant Director General,

HealthServices, New Delhi or Director of

Health Services or District MedicalOfficer/Civil Surgeon.”.

(ii) in Condition No.93, under heading “Conditions” , in sub-clause (a) of clause (ii), for thewords “a term of thirty six months or more”, the wo rds “a term of sixty six months” shall be substituted;(D) in List 5, for item (11), the following item shall be substituted, namely:-“(11)Nylon-12 / Ether Ester Elastomer / High Densit y Polyethylene (HDPE)” .

[F. No. 334/5/2015-TRU]

(Akshay Joshi)

Under Secretary to the Government of India

Note.-The principal notification No. 12/2012-Customs, dated the 17thMarch, 2012 waspublished in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i),vide, numberG.S.R. 185(E), dated the 17thMarch, 2012 and last amended by notification No,03/2015-Customs, dated the 7thJanuary, 2015, published in the Gazette of India,Extraordinary, Part II,Section 3, Sub-section (i),vide,number G.S.R 14(E), dated the 7th January, 2015

Seair is proud to have a loyal customer base from big brands.

We have successfully served many reputable clients for Import-Export Data Information Services. Here are some of our clients:

Get a free Import-Export data demonstrative report on desired products.

We don’t offer any assistance over buying or selling any products.

Thank You

Big thanks to showing your interest in SEAIR Exim Solutions. We’ve currently received your request for data information. We will return on the same query in a short span of time.

Copyright © 2009 - 2024 www.seair.co.in. All Rights Reserved.